Click Here

We have encountered the article involving What Would Cause My Electric Water Heater to Stop Working? listed below on the web and think it made good sense to relate it with you in this article.

Many contemporary residences make use of an electric hot water heater for their heating system, due to its comfort and convenience of use. Nonetheless, just like any other electric devices, issues may occur with its usage, all of a sudden. It can be actually discouraging to wake up to a cold shower as opposed to a hot one or having your bathroom with water that isn't warm adequate or even too hot. Whatever the case may be, water heater issues can be fairly aggravating. Fortunately, we have actually made a list of feasible options to your hot water heater concerns. There are a variety of factors that could cause a lot of these problems, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for safety. Whatever the problem is, getting it fixed should not pose too much of an issue if you follow these actions:

Examine Your Power Supply:

As standard as this might appear, it is very necessary. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water instantly stops working is to verify that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on again. Replace any type of damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's now working.

Examine the Heating Element in the Water Heater:

If it's not a power problem, after that attempt looking into your burner if it is still functioning. Check each of your heating elements to ensure the trouble isn't with any of them. If any of them is damaged, change that part and then check whether the warm water is back on.

Check Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you may need to examine the temperature setups on your top thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open the access panel and also press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been dealt with.

Call An Expert:

If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional point of view. The problem with your heating system could be that the cold and hot taps have been changed or it might be undersized for the quantity of hot water required in your home. Whatever the instance may be, a specialist plumber would aid solve the issue.

Conclusion

Hot water heater problems are not always significant. A lot of them result from minor concerns like a blown fuse or damaged heating element. Changing the damaged parts need to do the trick. Nonetheless, if you are still unable to solve the trouble, give a call to your closest plumber ahead to get it repaired.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

 

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

 

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

 

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

 

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

 

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

 

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

 

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

I am very interested in What Would Cause My Electric Water Heater to Stop Working? and I hope you enjoyed reading the blog post. Enjoyed reading our write-up? Please share it. Let others locate it. I truly appreciate reading our article about What Would Cause My Electric Water Heater to Stop Working?.

Book